Why is rkc so expensive

No more buys unless I need a bigger bell. And to spend a little more uprfront on bells I never need to replace to please my clients a little more seems like a good move to me. Yes they do complain about the quality of the bells when they train elsewhere.

And as a personal user and busy parent who is extremely time-poor, having kettlebells which are convenient to use, set up and do not take up a large space at home make sense. Yes I get to spend more time with family. They are certainly highly effective fitness and strength tool that is ideal for any busy person. And having quality kettlebells such as the RKC ones do make training more enjoyable and make me want to train a little more at home.

If you live in Australia, do email Matt at matt. Yes the RKC kettlebells are back in Australia! In my opinion, they are the best kettlebells to buy in Australia. And they are my preferred choice of kettlebell after using them for 7 years. He is based in Perth and has been coaching his clients who are usually over 40s and very busy get in shape, move well and healthily with less aches and pain and be stronger for life without living a highly restrictive lifestyle.

He offers both online and in-person coaching. Skip to content. Are They Worth The Price? I think you should boycott.

How much is a plane ticket to Russia and back? Are Kettlbells on the high end of the price scale? At first glance maybe, but I look at it like this. I havn't paid a gym membership in over two years, I save on gas not having to drive to and from, and I can lift whenever I want. So the bells have already paid for themselves. It's really a short term investment for a lifetime worth of health and fitness. DanMartin New member. KB value - priceless KB's are a cult, within a cult.

Very few people really work out. People who lift KB's would be working out anyway, but chose a path even less traveled. As long as you use reasonable care, any KB's purchased can be passed on for many generations.

Ultracharge1 New member. Brad F. New member. Compare them with other gym quality equipment. The cheep hex dumbells that sell for. Go look at any better quality piece of weight eqipment, a Eleiko, York Barbell, or a Texas power bar.

Or the plate that each company makes. In car terms just because a ford is cheeper than a Toyota KB , or a ferrari Eleiko products doesnt mean you want to have to drive one. By the way since you are clearly acting as a troll this will be my one and only responce to your stupidy on the subject. This post is for other resonable people's edification who might have a simmilar but better tempered question. I agree with the other posts There are many reasons.

But in the long run they are still cheap. Investing in well made equipment is always a smart thing to do. As they say : "A poor man can afford only to buy the best" Why? So you don't nickle and dime yourself to death on cheap stuff that needs to be replaced every year.

Like a gym membership! Also the biggest bang for the buck comes in the Knowledge you gain with the KB's. That is priceless! Rayshore New member. Everyone's already posted what I wanted to say Kettlebells are an outstanding deal.

End of story. Comrade Lisitsa New member. You get what you pay for!!!! My strength and stamina are through the roof.

I've lost a good bit of bodyfat. I work out in my house, so I DON'T have to get in my truck, drive to the gym, and then wait for some noodle-armed clown to finish doing his curls in the squat rack or have some other buffoon tell me that my pullups aren't as good as doing pulldowns, etc. Did I mention the inevitable chatterbox who wants to talk, talk, talk while I'm trying to keep my groove going. Kconrad New member.

Value The value of anything is in the individual's mind. Most people on this forum, love their kettlebells and use them on a consistent basis. To them the kettlebell is a great value.

This means you're getting much of the benefit of a competition bell in one-handed positions, while still maintaining the better two-handed performance of a cast-iron bell. However, unlike a competition bell, the Metrixx Elite's size still differs depending on the weight.

While other kettlebells can approach the smoothness of the Metrixx Elite, no other bell will be as consistently smooth. Most companies use standard molds repeatedly, and inevitably, residue from previous castings creates unevens surface textures like edges or gaps.

The single-use mold of Metrixx Elite bells delivers a consistency and smoothness unmatched by other manufacturers. The company also uses gravity die-casting instead of the faster pressure-casting technique favored by most companies.

Molten liquid iron is poured into a cast, and gravity slowly and evenly pulls it into the cast. Pressure castings are done with a high-pressure injection process. While pressure casting is faster and necessary for complicated casting with lots of small parts , gravity die-casting is generally the preferred casting method for creating solid, even surfaces on simple 3D objects like kettlebells.

Additionally, the Metrixx bells are e-coated with black paint. E-coating utilizes an electromagnetic application process where a charged kettlebell is submerged in an oppositely charged paint opposites attract! Powder-coated bells are spray painted; thus, the coat is more likely to be missing in spots or more uneven.

If you're used to standard Dragon Door RKC kettlebells or any of its many clones , the Metrixx Elite's rack position might feel strange at first, since the ball part sits higher up on the forearm by comparison. This especially stood out because the other bells tested all sat in the position close to the wrist that I was used to.

But I quickly recognized I just needed to get used to the new weight-bearing position of the Metrixx Elite bell.

After lots of use, I felt more comfortable. If the Metrixx Elite is unavailable, or if you just want a standard-shaped bell without the wider handle, the Perform Better First Place Kettlebell feels the same in use as the high-end Dragon Door, but typically costs about 25 percent less.

In fact, its dimensions are identical except for the extra half inch of flat base diameter on the bottom of the Perform Better bell. This means it performs identically, but is easier to hold in a push-up position for the sometimes-precarious renegade row —typically done with two kettlebells of the same size.

Like the Dragon Door and Metrixx Elite, the First Place has a smooth, seamless handle, few surface defects, and a high-quality finish. Its finish is comparable to the e-coating on the Dragon Door or Metrixx Elite. But the bells we tested were really well made and showed no signs of being defective in build. In fact, none of our five baseball player panelists said they would pay extra for any of the other bells for the basic routines they were testing with.

CAP bells are also color-coated at the handle base for easy identification if you have a collection of bells, differentiating similar sizes can be difficult. The tackiness irritated my hands something fierce while performing snatches.

If imitation is the sincerest form of flattery, then the Dragon Door RKC Kettlebell should feel pretty good about itself. As a result, almost all cast-iron kettlebells sold in the US are based on the Dragon Door design. Unfortunately for Dragon Door, other companies have been able to duplicate its design at a comparable level of quality for a lot cheaper. It has a powder-coated matte finish, machined bottom, and color-coded handle for easy weight identification.

Rogue claims that its slightly coarser handles are designed to hold chalk well which they do , but I prefer not having to chalk at all. E-coating is a more time-intensive process because it involves dipping individual bells in an electrically charged paint bath to more thoroughly cover the oppositely charged opposites attract kettlebell.

E-coating is also considered the superior process because it allows for a comprehensive and uniformly thin layer of paint over the bell. Thus, there is superior protection from rust imperative in humid environments and less finish between the hand and cast iron a bulky or tacky finish can cause the ripping in the hands associated with kettlebell lifts. Powder-coating involves a spray-on application, which often results in an incomplete or uneven coating process. Not surprisingly, e-coated kettlebells are generally more expensive than powder-coated bells.

Because this bell seemed so different from the inconsistent reviews online, I called Perform Better to figure out what was going on. I spoke with Rob Milani, who runs sales and facility outfitting for the company, and he explained the eight-year evolution of these First Place bells. He said that the bells initially came with the rubber bottom plates because they were marketed to large box gyms concerned about floor protection.

They still have the plate available on the vinyl-coated bells. Milani explained that this partnership has produced the bell currently sold, and that the company plans on sticking with this design for the foreseeable future. Product Comparison: Competition Kettlebells Vs. Rise of the kettlebell , The Guardian. Darcy Riggs, Good for the money, but